ready-to-use, non-shrinking, sulphate-resistant cement mortar for injections and grouts



WILLBOLT® GROUT s a ready-to-use, non-shrink, sulphate-resistant cement grout for injection and grouting. It is suitable for grouting and injecting anchors in rock, soil, concrete and masonry, and for filling joints, cracks and holes. The product can be used on vertical and horizontal surfaces as well as overhead with appropriate dosing of water in the preparation phase. The material penetrates the structure to be sealed, water is largely displaced by the viscous and hydrophobic mixture and hardens to form a stable and load-bearing cement mortar.
After curing, WILLBOLT® GROUT provides a force-transmitting injection of underside voids in concrete, underground cavities or roof gaps in tunnel construction.




  • good pumping and swelling properties
  • water and frost resistant
  • chloride-free
  • low chromate according to Directive 2001/53/EC
  • sulphate resistant
  • approved for fire barriers according to EN 13501-1 / DIN 4102 building material class A1 (non-combustible)
  • can be laid vertically, horizontally or overhead


  • used for stabilization and consolidation of cracks in foundations, walls, tunnels and civil engineering works in general
  • also suitable for the use of anchors, rigid anchors, cable anchors and all rock anchors with grouting technology



Granulometry (mm) 0 - 0,8mm
Compressive strength (MPa)after 24 h = 15
after 7 d = 35
after 28 d = 45
TDS & MSDS available upon request 


 Packaging form 

1050 kg Pallets42 Paper bags 25kg each
Other packaging types on demand


Dipl.-Ing. Karl-Heinz Lindenbauer

Head of Sales Civil Engineering & Mining (DACH region)

Phone:+49 231 9640 413
Mobile:+49 173 931 22 43

Dipl.-Ing. Paulo H. Tsingos

Head of Export Civil Engineering & Mining

Mobile:+49 173 940 58 40

Dipl.-Ing. Sergej Kremer

Internal Sales Civil Engineering & Mining East Europe

Phone:+49 231 9640 312
Mobile:+49 176 576 723 69
Fax:+49 231 9640 232

Peter Simon