WILLKAT® LV

Silicate resins non-foaming

 

Product description

WILLKAT® LV are organic, rigid injection materials that are used to stabilize dry, damp and wet zones in geological fault zones. Their low reaction temperature allow their use in the coal mining industry. The hardening of silicate resins is not affected by water and the cured resin is cuttable. Depending on the soil conditions, non-foaming silicate resins are used in front of TBM drilling heads for stabilization.

 

Product details

Properties:

  • non foaming, non-flammable silicate resin with short reaction times. (40-50 sec)
  • very good adhesion-even on humid surfaces
  • low reaction temperature (coal mining!)
  • hardening is independent of water
  • cured resin is cuttable

Main usages:

  • grouting and uplifting in road constructions 
  • stabilizing of fault zones in dry, humid and wet zones. 
  • usable for anchoring 
  • umbrella injection in front of TBM‘s. 
  • for coal mining applications

 

Technical specifications

 

Cure time (25°C):80 ± 10 (s)
Foam Factor:1
Mixing ratio:1:1
TDS & MSDS on request 

 

Packaging units

2 Tin can à 20l (40l) 
Other delivery forms on request 

 


CONTACT

Dipl.-Ing. Karl-Heinz Lindenbauer

Head of Sales Civil Engineering & Mining

(DACH region)

E-Mail:karl-heinz.lindenbauerf-willichcom
Phone:+49 231 9640 413
Mobile:+49 173 931 22 43

Dipl.-Ing. Paulo H. Tsingos

Head of Export Civil Engineering & Mining

E-Mail:paulo.tsingosf-willichcom
Mobile:+49 173 940 58 40

Dipl.-Ing. Sergej Kremer

Internal Sales Civil Engineering & Mining

East Europe

E-Mail:sergej.kremerf-willichde
Phone:+49 231 9640 312
Mobile:+49 176 576 723 69
Fax:+49 231 9640 232

Peter Simon