WILLIT® S-KSM FAST
Single-component, cement-based, ready-to-use, accelerated dry-mix mortar
Product description
WILLIT®S-KSM FAST is used
- for system-compliant repair and renovation of concrete surfaces of all kinds. Spreads to 6 mm thin
- for coating large surface areas in sewers, hydraulic structures, wastewater structures, containers and fittings
- for grouting, sealing, coating and levelling interior and exterior surfaces with a high resistance to
TECHNICAL SPECIFICATIONS
Processing time at 20°C [min] | 3 |
TDS & MSDS on request |
PROCESSING
Mix the mortar to a homogeneous, smooth consistency in a compulsory mixer or using an electrical handheld mixer with a large paddle at low speed. Pour approx. 4/5 of the required quantity of water into the mixing tub and add WILLIT® S-KSM with the mixer paddle running. Add the remaining water little by little. WILLIT® S-KSM is ready to use after a total of 3 minutes of mixing and must then be processed immediately. Please request additional technical advice if using a plastering machine.
PACKAGING UNIT
Paper/ PE sacks 25 l | 25 kg |
Other delivery forms on request |
CONTACT
NICOLAS HOUY
E-Mail: | nicolas.houy(at)f-willich.de |
Phone: | +49 6873 9999 216 |
Mobile: | +49 173 146 27 32 |
JÜRGEN SCHOLZ
E-Mail: | juergen.scholz(at)f-willich.de |
Mobile: | +49 174 195 10 94 |